Your wall, set out tile by tile
Add your measurements and mark any sockets. You'll see where every tile falls, and what the finished wall comes to.
Antique mirror tiles, 400 × 400 mm. Enter your measurements in millimetres - we cut the perimeter tiles to fit, and mirror-safe adhesive is complimentary with your order.
Choose your wall shape
Enter your measurements
Measure the wall itself, not the tiles. The letters match the drawing on the right.
Set out the tiles
Where the full tiles start decides where the cut tiles land. Watch the drawing update.
Centring on the recess keeps the tiles even around the hob when the recess sits off-centre - usually the join you actually look at.
Sockets and switches
Add each faceplate, then drag it on the drawing or type the position. Measure to the centre of the plate.
Decorative rosettes
Optional. Solid rosettes that sit where four tile corners meet. Leave at zero if you don't want them.
Your wall
Your order
Ref -
Prices include VAT. Delivery calculated at checkout.
Cuts are taken on the perimeter only, apart from socket cut-outs. Where a cut piece comes out at 200 mm or less on its short side, the offcut is big enough to make a second piece, so two pieces are taken from one tile - that saving is already in the tile count. Pieces wider than that, and any L-shaped piece around the hood recess, each need a tile of their own. Every cut is made with a diamond glass cutting tool. Cutting is charged once per tile that is cut, however many cuts that tile needs - so a tile split into two pieces carries one charge, not two. Every cut edge is re-polished by hand, and mirror-safe adhesive is complimentary with your order at one tube per six tiles. Antique mirror is a mottled, hand-aged glass: no two tiles are alike, and the foxing shown here is indicative rather than a match for the sheet you receive. Final measurements are the customer's responsibility - measure in three places and work to the smallest reading.
We'll check it with you
Send your design over and we'll confirm the measurements, the cuts and the socket positions before anything is made.
Send my design for a quote